PUNTEX TA
Registration
Thermoplastic toe puff; single side adhesive; no woven support.
► PUNTEX TA 0 thickness - 0.65 ± 0.05 mm
► PUNTEX TA 1 thickness - 0.80 ± 0.05 mm
► PUNTEX TA 2 thickness - 0.90 ± 0.05 mm
► PUNTEX TA 3 thickness - 1.10 ± 0.05 mm
► PUNTEX TA 4 thickness - 1.25 ± 0.05 mm
Sheet size: 100 cm. х 150 cm.
Way to cut: non directional
Skiving: steel or rubber roll
Applications:
Toe has to be applied with the right pneumatic pressing machine equipped with heating plate, thermostat.
Temperature: from 130 to 150°C
Activation: from 5 to 12 sec., depending on thickness and temperature.
Pressure: +/- 5 bar
Clamp Heater Reactivation before lasting
Temperature: from 120 to 140°C
Contact time: from 5 to 12 sec.