Login

Please enter your username and password.

EnglishБългарски
IMPRIMER PUR-3IMPRIMER PUR-3

IMPRIMER PUR-3

Registered users can see more detailed information.
Registration

DESCRIPTION AND APPLICATIONS:


 Solvent based polyurethane primer. It´s being used generally as a two component primer, mixed with 5 % of DesmodurRFE or similar hardener of the isocyanate type.
Specially used in the shoe industry, as a primer for rubber, TR, PVC and polyurethane soles, suitable pre-treated, to allow long storage before cementing. Moreover it is also suitable as a primer for leathers and other porous materials, where it will improve wetting, and therefore the adhesion, with polyurethane adhesives PLASTIKOL.
 

TECHNICAL DATA:
Solid Content (%): 15 +/- 1.5%
Viscosity Brookfield LVF: 250 to 500 centiPoises (mPa.s) at 22 +/- 4°C
Dry Time: At 20°C /50%, 30 minutes aprox.(with 5% of Desmodur RFE)
Pot-life: At 20 °C, 3 hours aprox. with 5% of Desmodur RFE; and around 24 hours with 5% of Desmodur RC.
 

 INSTRUCTIONS FOR USE:
  Mix just before use with 5% of hardener, and to apply over the material with the adequate preparation, letting it dry a minimum of 30 minutes and a maximum of 24 hours, in normal conditions.
 

WORK HAZARDS:
Easy inflammable product. See the Safety Data Sheet.
 

STORAGE:
  If containers are well sealed and stored in a cold-dry place (+5 °C +35 °C), good stability for a 6 months period. The product should be used at this temperature to obtain its best properties. Sensitive product to freezing, it should not be exposed to temperatures close to 0 °C.

  Our indications are based on serious laboratory studies and our experience, but do not excuse the user to make their own tests, because the materials diversity and the different use conditions, make yours the responsibility of their applications.

Please fill in all fields marked with asterisks (*).