Login

Please enter your username and password.

EnglishБългарски
AQUATACK  300-SAQUATACK 300-S

AQUATACK 300-S

Registered users can see more detailed information.
Registration

 DESCRIPTION AND APPLICATIONS
 

  Water based contact adhesive for auxiliary works (combining, lining, folding, etc.) in shoemaking and
leather goods industries (belts, etc) with natural and synthetic materials; for covering heels and
cushioned insoles together with MONTAROL DIP-135 (dipping). Adequate heat resistance.
Solvent-free. Non-flammable. Spray application. High tack. Great efficiency. Good bonding with soft
joints. Adequate heat resistance.

TECHNICAL DATA
Based: Synthetic latex.
Solid content: 43 +/- 3%
pH: 9 - 10
Viscosity Brookfield LVT: 100 – 1.000 mPa.s, a 22 +/- 4°C
 

INSTRUCTIONS FOR USE
   Adhesive must be sprayed by air gun (1 – 1.5 mm diameter and 2-3 bar), in a thin layer onto one or both materials to be bonded, depending on the initial strength needed. The materials to be cemented should be dry and free of dirt, dust, oil, etc. Applying only to one side, attaching must be made immediately while wet. Applying to both sides, until 30 minutes aprox.(open time), depending on the quantity of adhesive, the porosity of the materials, room temperature and air ventilation. Pieces must be pressured guarantying a good contact.
   The final strength of the bonding is not obtained until all the water has been eliminated. This time depends on the type of materials and its porosity.
 

STABILITY
   Aquatack 300-S must be stored in a cool – dry place, between +5°C and +30°C. Stored in that conditions, good stability for a period of 6 months at least. Risk of freeze below 5°C.
This product do not contain solvents, neither dangerous components that should be specified.

  Our indications are based on serious laboratory studies and our experience, but do not excuse the user to make their own tests, because the materials diversity and the different use conditions, make yours the responsibility of their applications

Please fill in all fields marked with asterisks (*).